The basic features are:

• Accuracy <= 0,25%
  
• Long-Term Stability <= 0,3% / 12 months
  
• Connection and housing of high-grade steel 1.4571
  
• Stainless steel diaphragm for measurement ranges < 1 bar
  
• Ceramic diaphragm for measurement ranges >= 1 bar
  
• Measuring range from 0 - 100 mbar to 0 - 400 bar

The basic features are:

• Accuracy <= 0,25% (turndown 5:1)
  
• Long-term drift<= 0,25% / year
  
• Connection and housing of high-grade steel
  
• Measuring cell with ceramic diaphragm
  
• Measuring range 0,2 to 400bar
  

Just like the SITRANS P DS III, the SITRANS P300 stands for precise measuring and ruggedness, and especially for an innovative operating concept. With the SITRANS P300, these time-proven features are now also available for processes in the food & beverage and pharmaceutical industries.

With a maximum error of measurement of 0.075 %, a hygienic stainless steel housing with laser-inscribed rating plate, and the time-proven SITRANS P DS III operating philosophy, it fits in perfectly with the SITRANS P product range.

SITRANS P300 features:

• Measurement cells for gauge and absolute pressure
• Measurement cells with flush mounted diaphragm
• extended simulations and diagnostic functions
• Measurement deviation ≤ 0,075%
• Long term stability ≤ 0.25% / 60 months
• Specified teperature range up to 392oF (200oC)

Parameters can easy set via three local push buttons and LCD display, HART or PROFIBUS PA profile 3.0 communication.

The SITRANS P Series DSIII is a precision digital transmitter for pressure, absolute pressure, differential pressure, flow and level and has extensive diagnostics and simulation functions. The standard unit already delivers excellent, TÜV-approved reliability through its evaluation abilities.

The basic features are:

• Extensive diagnostics and simulation functions
  
• Accuracy <= 0,075%
• Long-Term Stability <= 0,25% / 60 months
• Wetted parts in stainless steel 1.4571, Hastelloy, Monel, Tantal, Gold
• Measuring range 1mbar to 400bar
• Wide range of certification and approval e.g. ATEX EEx ia, EEx ib, Dust protection, FM, CSA
  

Settings can be made on-site with an LCD display, through the HART protocol or Profibus PA, Profile 3.0.

Temperature measurement Instruments

SITRANS TW is a consistent further development of the hundred thousand times proven SITRANS T for the 4wire system in the mounting rail housing. Its many new functions set new standards in temperature transmitters. Its diagnostic and simulation functions provide the necessary clarity during commissioning and operation. Its HART®-interface makes the SITRANS TW easily adaptable to any measuring job with SIMATIC PDM.

Physical values can be preset with the simulation function. This enables testing of the complete signal path right as far as the control system without the need for tools. The drag pointer functions measure the system’s process variable minimum and maximum.

All SITRANS TW control room devices are available in non-intrinsically safe versions and intrinsically safe versions for applications under extreme conditions.

SITRANS TF comes in rugged diecast aluminum or long-lasting high-grade steel. It transforms signals from resistance thermometers, resistance transmitters, thermocouples and voltage transmitters into a load independent DC signal corresponding to the sensor characteristic. The remotely mounted sensor prevents the transmitter heating up at high temperature, long collar and protective pipes prevent vibrations and oscillations in SITRANS TF.

For tags with difficult to access you can mount your SITRANS TF remotely at easily accessible places and display the measured value on the freely programmable digital display.

You can even use the SITRANS TF in a version without a transmitter as a comfortable display unit for all 4 to 20 mA signals.
All variants of the SITRANS TF are available in intrinsically safe or explosion-proof versions.

SITRANS TF2 integrates three elements in one device: a Pt100 resistance thermometer in a stainless-steel thermowell, a high-grade stainless-steel housing with a high degree of protection, and a built-in measuring transmitter with LC display with three configuration pushbottons.
It is used to indiacte and monitor the temperature measured at the point of installation.
The SITRANS TF2 SITRANS TF2 is available in an axial and a radial version.

Features:

• High measuring accuracy
• High-grade stainless-steel housing with a high degree of protection
• Precise display with resolution of 1/100˚C in the highest measuring range
• Measuring ranges: - 50 to 200˚C (adjustable)
• Customer-specific thermowell lengths: 73 to 2.500 mm

SITRANS T3K PA transforms signals from resistance thermometers, reistance transmitters, thermocouples and voltage transmitters into digital signals. The measured value from the microprocessor is them made available with status as a quality specification and other parameters on PROFIBUS PA via electrical isolation. The sensor, limit values, failure behavior etc. are programmable. SITRANS T3K PA therefore offers you various diagnosis and simulation possibilities.

High safety
The current consumption is less than 11mA. For safety, the bus current is reduced to less than 14 mA in the event of an error, an EMC filter prevents malfunctions in the case of electromagnetic interference. Intrinsically safe versions of this device are also available. EEx ia and EEx ib.

Fast, error-free parameterization
SITRANS T3K PA is compact and fits in the type B connection head with raised lid. A final word about the parameterization: It is done with the comfortable software package SIMATIC PDM.

Sensors
Full range

Delivery of complete tags for all applications:
Our wish is to meet your measuring point and sensor requirements, irrespective of the industry or application. We provide you with the necessary support and offer our wide depht of know-how.
Selection of appropriate materials for thermowells and extensions:
Does your application include high temperatures, high pressures or corrosive media? Or are the temperature measurements made in rapidly flowing media? We will help you find the ideal solution. Whatever qour process connecitons, whether flanged, screwed glands or welded, they are no problem to us.
All common sensors.
Choose the sensor you need from a wide range of thermocouples or resistance thermometers. Of course we will also assemble suitable transmitters for you and adjust them to the sensor and measuring range you have ordered .
It makes no difference at all whether you are measuring low or high temperatures or whether you use thermocouples or resistance thermometers. Even if you want to measure DC current or voltage – the SITRANS T family of transmitters are always a first-class partner.

The FUS060 transmitter FUS060 features a range of advanced technologies to optimize efficiency and accuracy and is ideal where the requirements of the OIML R117 custody transfer standards have to be met. It comes with 2 tracks as standard or an optional 4 tracks for better performance and higher accuracy. It has extended diagnostic capabilities, ATEX certification and bus communication.

FUS060 features

• HART (PROFIBUS PA pending)
• ATEX certification (application pending)
• Meets the requirements of the OIML R117custody transfer standards
• Up to 4 tracks for better performance and higher accuracy
• Reliable and accurate flow measurements
• Long time stability
• Diagnostics functions and control values

The SONO 3000 transmitter can be used on any pipe up to DN 4000. It employs an advanced transit-time signal processing technology with an innovative direct shot ultrasound transmission technique. The digital correlation ensures reliable and accurate signal detection for a wide range of processes

SONO 3000 features

• Available in the following versions: IP67 and IP65 (AISI)
• Unique correlation signal ensures reliable signal detection
• Automatic reading of SENSORPROM data for easy commissioning
• User configurable operation menu with password protection
• Comprehensive self diagnostic capabilities for error indication and error logging
• Standard outputs: analog, pulse and relay

The SONO 3100/FUS060 flowmeter consists of a SONO 3100 sensor with O-ring or flange transducers depending on the application. The standard version is delivered as a 2-track sensor with or without flanges; 4 tracks are available but only upon request. Available pipe materials include carbon or stainless steel. The FUS060 transmitter is engineered for high performance applications and designed for remote installation in hazardous as well as non-hazardous environments. In addition to the standard outputs, it also offers Profibus PA or HART communication.

SONO 3100/FUS060 features

• HART communciation (Profibus PA pending)
• Replaceable transducers under pressure
• No additional pressure drop
• Reliable and accurate flow measurements
• Long time stability
• Diagnostics functions and control values
• Special sensor material (upon request)
• 4 track sensor technology (upon request)

SITRANS F C Coriolis mass flowmeters are suitable for measuring liquids and gases. The measurement is independent of changes in process conditions and due to this versatility the meter is easy to install and also recognized for its high accuracy in a wide turn down range.

Mass flowmeters provide the most accurate flow measurement today with highest accuracy and repeatability of only 0.1% of the flow and a rangeability from 100:1. Flowmeters based on this technology can measure density, volume flow, percent fraction and temperature. The advantages include a high degree of safety and reliability, a low pressure drop, no regular maintenance needed making the flowmeters user-friendly, a single tube design with only two welding points, CIP compatible, self-draining and made of corrosion resistant materials.

SITRANS F R rotary piston meters from Siemens are bestsellers. Although millions of them have been sold over the past few decades, they still have lost none of their attractiveness. The benefits offered by their conventional mechanical measuring technique include reliability, precision and a robust design for measuring aggressive media and high-viscosity fluids. Viscosities ranging from less than one mPa.s to 350,000 mPa.s are no problem for the reliable rotary-piston meter.
Characteristics:

• Officially pre-calibrated
• Accuracy +/- 0,2%
• Applicable for dosing tasks
• No electrical power supply
• Max. fluid temperature 300°C
• Heating tube available
• Easy to maintain
• Mobile measurements
• Rugged design for use in vehicles
• For all mounting conditions

The SIPART PS2 is the absolute number one amongst electro-pneumatic position controllers. Our experience from many years of field operations speaks for itself and means security for your application in the future.

Simple operation is guaranteed, either on-site with push buttons and display or with an optional additional communication program SIMATIC PDM via HART interface or by PROFIBUS PA protocol.

The automatic commissioning saves a great deal of time.
Fast amortization results from the low air consumption of the device.

Numerous new diagnostic functions have been implemented in SIPART PS2 which provide information about the status and the previous operating conditions both of the device and the fitting.

Mounting bracket: NAMUR

1. Connector to DIN IEC 534-6 linear actuators Ordering no. 6DR4004-8V supplied from LZN
   
2. Connector to VDI/VDE 3845 or DIN 3337 part-turn valve actuators also for Norbro, Keystone etc. Ordering no. 6DR4004-8D supplied from LZN. This part converts the universal PS2 shaft to a NAMUR drive. A bracket is also required.

Process protection devices act as early warning systems to avoid costly process interruptions and breakdowns of equipment. Non-contacting motion sensors detect changes in motion and speed of conveying, reciprocating and rotating machinery.

Acoustic sensors

SITRANS DA400 for continuous monitoring of oscillating positive displacement pumps. The diagnostic system detects even tiny leaks in the delivery valves. As a result, defects can be detected earlier in their development before they affect the process.

The SITRANS DA400 acoustic analyzer can simultaneously and continuously monitor up to four independent delivery valves. Four additional inputs are also available for sensors for monitoring the pump diaphragms and oil.

System operation and configuration are easily done either locally by LCD and keyboard or via PROFIBUS DP / PA.
Status and alarm notification is signaled to the master process control system via digital outputs or via PROFIBUS DP / PA and also available on the local display.

The Siemens Milltronics probes work on the principle of Faraday’s Laws of Electromagnetic Induction. When a ferromagnetic object enters the probe’s permanent magnetic field, it distorts the flux, causing its coil windings to generate a voltage. This voltage is proportional to the strength of the magnet and the number of wire turns in the coil (constant in the probes) and the speed at which the ferrous target passes through the flux. The generated voltage is also inversely proportional to the square of the distance between the target and the probe.

MFA 4p motion failure alarm controller is a highly sensitive single setpoint motion sensor system, used with Milltronics MSP and XPP probes.

The MFA 4p detects changes in the motion and speed of rotating, reciprocating or conveying equipment. It warns of equipment malfunction and signals through contacts to shut down machinery in case of a slowdown or failure. Its reliability makes it a cost-effective way to protect valuable process equipment.

The single setpoint system suits most industrial applications. This versatile unit can be used on tail pulley shafts, driven pulleys, motor shaft sensing, belt or drag conveyors, screw conveyor flights, bucket elevators, fans and pumps.

A special feature is the adjustable 0-60 second time delay, allowing the monitored device to accelerate to normal running speed before monitoring begins. A wide range of probes are available to suit specific needs, including high temperatures, corrosive, and Class I, II and III installations. The CE approval allows the MFA 4p to consitently meet the needs of the mining, aggregate and cement, and other primary and secondary industries.

Key Applications: tail pulleys, motor shaft sensing, screw conveyor flights, bucket elevators

• Up to 100 mm (4") gap between target and probe
• Switch selectable overspeed or underspeed detection
• Setpoint adjustment 2 to 3000 PPM (pulses/minute)
• Adjustable start-up time delay
• Visual indication of probe operation and relay status
• General purpose, suitable for majority of industrial applications; rugged probe designs provide unmatched reliability

Milltronics MillPulse 600 is a heavy-duty 2-wire motion sensor that provides solid state switch output to PLCs between 18 to 135 V AC or DC.

Typical applications include tail pulley shafts, driven pulleys, motor shaft sensing, and screw conveyor flights. Non-contacting, the Millpulse supplies cost effective equipment protection even in the harshest conditions.

This rugged unit is impervious to dust, dirt, build-up and moisture, and is ideal for such primary industries as mining, aggregate and cement plants. Operating where other systems are prone to failure, the non-contacting design eliminates the need for lubricating, cleaning and part replacement. It will reduce downtime and clean-up expenses associated with conveying equipment failure. Its pulse output can be used to minimize spillage, prevent damage, detect fire caused by belt slippage at the head pulley, and warn of other conveyor malfunction.

The MillPulse 600 offers underspeed, overspeed, differential speed and speed indication functions by a PLC. With an all aluminum body, it operates from -40 to 60°C (-40 to 140°F).

Key Applications: tail pulleys, driven pulleys, motor shaft sensing, screw conveyor flights, bucket elevators

The Milltronics ZSS is a heavy-duty zero speed alarm switch. This non-contacting unit provides cost-effective equipment protection even in the harshest conditions.

Typical applications include tail pulley shafts, driven pulleys, motor shaft sensing, and screw conveyor flights.

This rugged unit is impervious to dust, dirt, build-up and moisture, and is ideal for such primary industries as mining, aggregate and cement plants. Operating where other systems are prone to failure, the non-contacting design eliminates the need for lubricating, cleaning and part replacement. Downtime and clean-up expenses associated with conveying equipment failure are reduced by the ZSS. It alarms to minimize spillage, prevent extensive damage or even fire caused by belt slippage at the head pulley, and warn against conveyor malfunction.

The ZSS has built-in selectable start delays, and 1 form C relay contact. With a phenolic body, it operates from -40 to 60°C (-40 to 140°F).

Key Applications: tail pulleys, driven pulleys, motor shaft sensing, screw conveyor flights

• Up to 38 mm (1.5") gap between ZSS and targets
• Rugged, low maintenance suitable for tough environments
• 1 SPDT Form C relay contact
• Provides cost-effective protection

SIPART DR 19 - in 96x96mm format for industrial applications such as mechanical and systems engineering

• Directer sensor connection
  
• Integrated control program
  
• Continious or step controller (K/S) (0/4 until 20mA / relays)
  
  

SIPART DR 21 - in 72x144mm format are ideal solutions for all standard tasks

• Excellent trend display with analog bar for process value and setpoint
  
• Continious or step controller (K/S) (0/4 until 20mA / relays)

SIPART DR 22 - in 72x144mm format is intended for complex closed-loop control systems

• 2 independant control-loops
  
• input area is freely configurable, extensive function library
  
• up to 11 analog inputs or 9 analog outputs

SIPART DR 24 - is a multitanlented unit for all processspecific tasks in 72x144mm format

• up to 4 independant control-loops
  
• library with basic and complex functions
  
• up to 11 analog inputs or 9 analog output

Continiuous line recorders, up to 3 channels, alphanumeric print optional, cycle time 250ms pen lift function at power failure

Dot recorders, 6 channels, dot printing or line printing, cycle time 600ms

Dot recorders 6 analog and 6 virtual channels, programmable mathematical functions, programmabel measurement